What We Fix
Our cooktop repair covers the full range of faults we see in Brookline kitchens, on Sub-Zero, Wolf, and the other luxury brands. a brand-focused technician diagnoses the problem, gives you a written estimate, and completes most repairs on the visit with genuine OEM parts.
- Gas burner ignition faults
- Induction zone not powering
- Electric element and coil service
- Spark module and igniter replacement
- Control and touch-panel repair
- Continuous-spark and clicking faults
Common Problems We See
Burner Clicks Continuously
A wet or cracked igniter, or a failed switch, keeps the spark firing.
Induction Zone Dead
A failed induction coil or power board leaves one zone cold.
NO Spark on One Burner
A fouled igniter or a bad switch stops that burner lighting.
Cooktop Will Not Power On
A control-board or power fault kills the whole surface.
Typical Causes
Most cooktop faults trace back to one of a handful of causes, which our diagnosis is built to isolate:
- Fouled or cracked spark igniter
- Failed induction coil or inverter board
- Cracked or damaged glass switch
- Spark module failure
- Control board power fault
Written Estimate, Then the Repair
You approve a written price before any work begins. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.
Brands We Service for Cooktop Repair
We service cooktop faults across the luxury roster. A few of the brands we see most often for this repair in Brookline:
Error and Fault Reference
A quick reference for the symptoms and codes behind cooktop problems and how we resolve them:
| Symptom / Code | Likely Cause | What We Do |
|---|---|---|
| Induction error / E code | Coil or inverter fault | Read the code, test the coil and inverter board |
| Constant clicking | Wet or shorted igniter switch | Dry and test the switch, replace if shorted |
| Dead zone | Coil or relay failed | Test the zone coil and its relay |
Book Your Cooktop Repair
Tell us the brand, model, and symptom. We will confirm a time and bring the parts needs and availability are confirmed after diagnosis.
Frequently Asked Questions
Why Does My Wolf Cooktop Keep Clicking?
Continuous clicking usually means moisture or debris around an igniter, or a shorted spark switch. We clean and dry the burner assembly and replace the switch when it stays shorted.
Can You Fix One Dead Induction Zone?
Yes. A single dead induction zone points to a failed coil or inverter board for that zone. We isolate the fault and replace the coil or board so all zones power evenly.
My Cooktop Will Not Turn on at All. What Is Wrong?
A completely dead cooktop is usually a control-board or incoming-power fault. We verify power at the unit and test the board before quoting the repair.
Related Services
Refrigerator Repair
Sub-Zero built-in, integrated, and column refrigerators lose their cool for a handful of w.
Wine Cooler Repair
A wine cooler that drifts a few degrees can ruin a cellar over a season. We service Sub-Ze.
Ice Maker Repair
Sub-Zero standalone ice machines and built-in ice makers stop producing for reasons rangin.
Range Repair
Wolf dual-fuel and gas ranges are built to cook hard for decades. When a burner will not l.